“Everyone you will ever meet knows something you don’t.”
Over the past half decade or so many college football teams have become experimental with their helmet and jersey designs. The University of Oregon knows a thing or two about this subject. When I was watching the Clemson v. Maryland game this afternoon I was blown away by the design of Maryland’s helmets and jerseys, specifically the helmets. They were badass. More badass than any football helmets I’ve ever seen. But why? What was it about these helmets that made them so much more attractive than any other football helmets?
As I started thinking about this question I realized I didn’t know much about the history of football helmets, so I did some digging. My research on helmets in the National Football League in the United States surfaced some interesting information. Apparently the origin of the football helmet dates back to 1896 when leather was fashioned into a protective headpiece. Eventually these primitive helmets contained padded leather which made them closely resemble the helmets used by aviators at the time. Despite the creation of the leather football helmet, injury rates remained high and many players chose not to wear one. It wasn’t until the 1920s that leather football helmets became widely used, but still they provided little protection and were uncomfortable to wear.
The year 1938 marked the first time football helmets were made out of plastic rather than leather. These plastic helmets were much more comfortable to wear and provided better safety for the players. Following this big advance in technology, the NFL required most players to wear helmets during the 1940s and by the 1950s nearly every NFL player wore a plastic helmet. While further advancements to the football helmet have produced modern helmets with a different look than their predecessors, the basic concept of helmet design remains the same: protect the player’s head with a hard outer shell and padding inside.
Alright, so that’s the history of football helmets. When did designs and logos enter the picture? Well, again we go back to the 1940s when Fred Gerhke, a halfback for the Los Angeles Rams who was also trained in art, hand painted his interpretation of the Rams’ logo onto his leather helmet. I can’t find information about whether he was the only player on the field with a painted helmet, but if he was I’m sure that must have been quite a remarkable sight.
Gerhke’s logo was eventually reproduced onto plastic helmets and remains on the Rams’ helmets today. Currently, the Cleveland Browns are the only NFL football team with no logo on their helmets. In fact, the Browns’ current helmet design is what nearly all of the helmets looked like in the NFL in 1960. The solid color with a stripe down the center design was ubiquitous. A few teams threw the player’s number onto the helmet, but there were no logos. That fact changed from 1962 onward. During this season many teams slapped logos onto the side of their helmets with little to no change to the existing ‘solid color with a stripe down the middle’ design. The landscape hasn’t changed very much since then either.
Football helmet design in the NFL has historically been dull despite its beginnings with the artist Gerhke. Its approach since the 60s has been based purely on logic: if players spend most of their time looking lengthwise down the field and most of the spectators are on the left or right side of the field, put the team’s logo on the left and right sides of the helmet. Every team except the Pittsburgh Steelers have done exactly that. They’ve taken the team’s logo, centered it on the side of the helmet, and provided plenty of negative space around the logo. This way of thinking is boring, dated, and played out.
However, the old way of thinking about helmet design may be coming to an end as college teams embrace progressive looking uniforms. This shift has largely been pushed ahead by the clothing and shoe companies which sponsor college teams. The effort to give teams more distinctive uniform designs is causing uniforms to break the traditional design rules.
Modern broadcast television and video games are changing uniforms as well. Gone are the days when the TV broadcast of a game only used a few cameras on the sideline. Nowadays, the crew covering a game may be using as many as two dozen cameras which focus on various aspects of the field, sidelines, and spectators from all sorts of different angles. The near-360º coverage of the game means that fans are no longer seeing the players exclusively from the left and right sides. Instead, we see close-up shots of players in high definition from all imaginable angles.
When it comes to football video games, few have reached the level of popularity attained by the Madden NFL series. In fact, Madden video games have become so popular that the primary camera angle from the video game has entered television broadcasts. Colloquially known as “Madden Cam”, the shot from the Skycam positioned above and behind the running back is becoming ever more common in broadcasts. For many years football video games sought to imitate real life, whereas today we are seeing real life imitate elements of video games.
The people who design modern football uniforms now consider all of the factors mentioned above when preparing next year’s jerseys. When I viewed Maryland’s uniforms on TV and thought, “Wow, those look good!”, I was witnessing the successful efforts of designers who understand how to make a uniform attractive from many angles. Plus, it doesn’t hurt that Maryland’s helmets look like they could pass for motorcycle helmets.
Before I end this post with complete praise for Maryland football, I need to note that not all of their uniform designs have been successful…
Note: my advice and story in this post come from obtaining my motorcycle license in California. The laws and process for obtaining a license in other states may vary but my advice about the fundamentals of riding a motorcycle remain the same no matter where you are.
So you want to ride on two wheels, huh? Motorcycling is an amazingly fun but potentially risky activity. And that includes riding a scooter too.
One summer when I was in Idaho with my family, my brother and I decided to pursue getting our motorcycle licenses. We looked into the classes put on by the Motorcycle Safety Foundation (@MSF__USA) and signed up for one in Alameda, CA. We had to get up at the butt crack of dawn but it ended up being worth it. Turning on the motorcycles for the first time and idling there on the huge, empty, chilly parking lot was an incredible feeling. It only got better when we started weaving around cones and performing quick stops.
Let me back up for a second. The Motorcycle Safety Foundation, or MSF as it is popularly known as in the motorcycling world, is the first place to start when thinking about riding a motorcycle or scooter. Many people are tempted to buy the vehicle first and then pursue the license after. That is the wrong way to approach motorcycling. Buying the motorcycle before properly learning how to ride is wrong for several reasons:
Riding a motorcycle is a fundamentally different activity than driving a car. Modern cars are extremely easy to drive. There is no manual transmission to fuss with. There is virtually no movement required to direct the car down the road. All cars have fancy climate control systems to ensure that the weather outside the vehicle has almost no affect on the driver (until the weather becomes severe, of course). Cars are enormous, heavy objects with lots of tire area contacting the ground relative to motorcycles. Most of them are very safe to drive and have incredible safety features to protect the occupants during accidents. Motorcycles are light, small, quick, hard to see, exposed to the elements, and have zero protection for the driver in the event of an accident. Riding a motorcycle requires 100% of your focus 100% of the time the vehicle is on the road. The second you let your focus slip for any amount of time, you dramatically increase the chances that you will not be able to properly react in the event that something on the road becomes a hazard. In a car you can practically take a nap and you’ll get to your destination without incident. If you are not prepared to make this commitment to focus or are physically unable to devote this kind of concentration, I suggest you immediately stop pursuing your motorcycle license.
Because of the differences between riding a motorcycle and driving a car, you need to learn how to ride a motorcycle and not just practice riding. MSF is the best way to do this because they will give you a solid foundation of motorcycling knowledge to build on top of. Most MSF classes involve one day in the classroom and two days on a motorcycle. You must first pass a written test which is given to you at the end of the classroom session and then you must pass a driving test at the end of the outdoor sessions. You can check out the Motorcycle Operator Manual which is provided by the MSF to get an idea about what kind of material is covered in the classroom and out of the lot. If you manage to pass both of these tests, you are presented with a certificate and a card. The certificate allows you to go to the DMV and take a written test to obtain your M class license to legally ride a motorcycle. The MSF card gives you discounts at lots of motorcycle shops, some insurance agencies, and other nifty places. This is huge because when I bought all of my gear (Gloves, boots, pants, jacket, back protector, helmet, warm underclothing, and other accessories) the price tag was big. Taking a (one-time) 10% MSF discount off of that bill at Cycle Gear (@CycleGear) is a considerable amount to save. You will need to buy gloves and boots for your MSF riding classes. A helmet will be provided for you. Don’t buy anything more than gloves and boots, and don’t go super fancy on the gear. You have no idea yet if you really want to buy and ride a motorcycle yet. Wait until you can get your license and that MSF discount to buy the majority of your riding gear.
After you are done with MSF and you have your M class license, you are almost ready to purchase a bike. At this point in your motorcycling career, you still absolutely suck at riding a motorcycle. You first need to do some more studying before you are ready to go ride some strangers motorcycle, or even your friend’s. You might think I am joking about reading books to learn how to ride a motorcycle but I cannot stress the importance of these books enough. While the MSF course is crucial to learning how to ride, the books I recommend cover so much more material that you would never know otherwise. There are 2 books that I consider the bibles of learning how to ride a motorcycle. The first is titled Proficient Motorcycling: The Ultimate Guide to Riding Well by David L. Hough. This book discusses how to safely and smartly ride a motorcycle. It covers all types of riding situations and applies to every type of rider. I seriously recommend reading this book cover to cover. The next book is called Sport Riding Techniques: How to Develop Real World Skills for Speed, Safety, and Confidence on the Street and Track by Nick Ienatsch. While this book covers a more advanced and specific type of riding style (riding a sport bike), it is invaluable in understanding what is happening when you ride real world conditions. It also covers track racing so you can skip anything that gets too technical.
After you are done reading those books, and hopefully reviewing the notes you took while reading, you should have a pretty decent understanding of how to ride a motorcycle. One last thing I recommend is hopping on YouTube and searching for ‘how to pickup a motorcycle‘. At some point in your riding career, you or someone you are with will drop a bike. While motorcycles are relatively light vehicles, they are still extremely heavy and hard to lift. Understanding how to pickup a motorcycle will allow you to turn a disastrous situation into simply a bad one.
Now that you have a solid foundation of knowledge, you’re going to need to cement that knowledge into your head by riding a motorcycle. You want to either find a friend with a bike or shop around on Craigslist/Ebay for used rides. It is discussed in the MSF course but you will want to consider what type of motorcycle you want and how much power you need. People who purely ride around a city probably don’t want a big 500 cc motorcycle and someone who plans to eventually do lots of highway traveling probably won’t want a small 250 cc ride. Understanding how much power you need and can handle is important.
If you plan on buying your own motorcycle, it is recommended that your first one should be a used bike. Motorcycles lose a lot of their original value the second you roll it off the lot. You want to be sure you will ride your motorcycle before you make a big investment. Also, beginners are likely to make mistakes. Your bike might drop once or twice, you might ding mirrors when lane sharing, or you might slide out on slippery surfaces. All of these are very real possibilities for even experienced riders and it’s better for one of these things to happen to a used bike than a bike in pristine condition.
When buying a used motorcycle, there is a guide available online which covers absolutely every aspect of inspecting used motorcycles. This guide is called the Used Motorcycle Evaluation Guide and it’s written by Adam Glass. Before you go to look at your first bike, give this guide a thorough read. You want to be familiar with the different parts of a motorcycle and what could be out of place. Once you are actually looking at a bike and giving it a test ride, any ability you previously had to make sound judgments completely flies out the window. You will want to buy that first bike regardless of how much it costs and how bad of a condition it is. Do not buy the first bike you test ride. Even if the motorcycle is in perfect condition with a great price tag, hold off. Go home and sleep on the decision. Better yet, test ride at least 3 motorcycles before you make the decision to purchase. Trust me, you will be so much happier in the long run if you shop around.
After buying a motorcycle, you’re ready to ride! Make sure you always have your license, registration, and insurance on your bike at all times. Forgetting that stuff will get you in a boat load of trouble. Before you go willy-nilly on your motorcycle, remember that you still suck at riding the thing. Chances are that it’s been a few weeks since you completed the MSF course so you will need to find an open space (parking lot) to mess around in. Go to that parking lot and do the following:
Be sure to run through this list in an empty parking lot once every 3-6 months. That might seem like a short period of time but I can’t stress enough how important it is to have solid motorcycling fundamentals burned into your brain. Remember: when you are in an emergency situation, your reaction will default to your lowest level of training.
That’s about all the advice I have for new riders. One of the keys to a healthy motorcycling career is understanding that it is a risky activity. Although you cannot control the risk that exists on the roads, you can take steps to minimize that risk. Every effort you make to lessen that risk increases your chances of avoiding trouble.
P.S.- If you ride motorcycles and have any advice you feel is missing from this post, PLEASE let me know! I would love to make this post as comprehensive as possible. You can reach me on Twitter at @Magnuson. Thanks!